Welcome to AmericanCPR.com!

Image of Google+ icon signifying a link to Google+ page Image of Twitter icon signifying a link to Twitter page Image of YouTube icon signifying a link to YouTube page Image of Facebook icon signifying a link to Facebook page

CURRENT ANSI 2015 WORKPLACE FIRST AID GUIDELINES & WHY YOUR FIRST AID KIT MAY NEED AN UPGRADE OR REPLACEMENT

After reading the below ANSI Information, you will want an ANSI 2015 Kit, Cabinet, or Upgrade Pack. Click Here When Done.

Image displaying a wide range of ANSI comliant first aid kits.

American National Standard

Minimum requirements for Workplace First Aid Kits and Supplies Z308.1-2015

The minimum requirements for workplace First Aid Kits and Supplies guidelines were approved and have been in effect since June 17th, 2016 by the American National Standards Institute, Inc (ANSI). They decided to establish two classes of specific first aid kits,  Class A and Class B. These kits have been classified into four types- depending on the work setting and ensuring that each kit contains both a variety and an adequate supply of the essential items needed to deal with the most common types of injuries and/or illnesses that could occur at a workplace.

Image displaying a 25 Person ANSI Class A First Aid Kit with Plastic Case
  • Class A kits are considered more basic for most general settings.
  • Class B kits have a larger variety of items and extra supply for workplace settings that are considered higher-risk or industry specific.

Both kits have room for additional customizing. 2009 standards have been preserved for both class types, including the requirement of having scissors in both kits. A splint and a tourniquet are both required to be included in a class B kit. A splint by definition is a device used to immobilize body parts. A tourniquet by definition is a tight, wide band placed around an arm or a leg to constrict blood in order to stop flow through an artery. Pairing your kit with first aid training will better prepare the workplace to assist in case of an emergency.

Image displaying a 50 Person ANSI Class B Contractor First Aid Kit with Metal CaseAnother variation of the standard requirements to be included is that the first aid kit containers be practical in regard to the workplace. The kits have been classified into four types. Type I kits are considered to be geared towards the general office settings, manufacturing facility, or basic indoor use where there are no real high risk areas. These kits must have the ability to be mounted. Type II kits are to be transportable for indoor settings with no real “rough-handling” or equivalent to Type I kit environments. Type III kits are to be transportable, for both indoor and outdoor uses, and with the ability to be mounted. Common environments include both general indoor use and protected outdoor use. Type IV first aid Kits are similar to Type II, but heavy-duty, and are to be corrosion and moisture resistant for added protection, as well as to be wall mountable. Industries recommended to have these types of kits included the utility, transportation, construction, and the armed forces.

General requirements include the following items: Adhesive bandages, adhesive tape, antibiotic application, antiseptic, a breathing barrier, burn dressing (gel soaked), burn treatment, cold packs, eye covering, eye/skin wash, first aid guide, hand sanitizer, medical exam gloves, roller bandages, scissors, splint (Class B kit specific) , sterile pads, tourniquet (Class B kit specific), trauma pads, and triangular bandages. In addition, marking and labeling must be clear and permanent and the location of the kit must be easily accessible.

By establishing two classes of first aid kits, the choice will be easier for the consumer. Each kit has a variety and plenty of supply of required items for the company workplace. The four types of kits will help the company choose what is required for them depending on the environment allowing for easy usage.

Whether an office environment or a factory, it is required to be prepared to treat minor injuries. Even if you have a kit, it likely no longer includes content needed for the types of incidents that occur in the workplace. The International Safety Equipment Association 2015 minimum requirements for workplace first aid kits and supplies (American National Standard ANSI/ISEA Z308.1-2015) has been effective since June 2016. The assortment and quantity of supplies included in a first aid kit were chosen based upon a review of increased workplace incidents requiring first aid treatment, similar international standards, and current practices in treating injuries.


Below we have listed the basic component & kit case requirements. We have also linked to products that will help you comply with these regulations. For full compliance information and for help complying with the current regulations please feel free to contact us at any time.

Image displaying 2015 ANSI Class A Minimum Fill Requirements for Adhesive Bandages, Adhesive Tape, Antibiotic Treatment, Antiseptic, Breathing Barrier, Burn Dressing and more.
Image displaying 2015 ANSI Class A Minimum Fill Requirements for Tourniquets, Sterile Pads, Roller Bandage, Medical Exam Gloves, Hand Sanitizer, Triangular Bandage and more.